Z-524289.02.ZL FAG ROLL NECK BEARINGS for ROLLING MILL
| Brand Name: | FAG |
| Model Number: | Z-524289.02.ZL |
| da: | 160 mm |
| db: | 177.8 mm |
| dc: | 153.988 mm |
| Da: | 289.999 mm |
| Ca: | 89.789 mm |
| A1: | 158.75 mm |
| A2: | 288.925 mm |
| S: | 4.763 mm |
Product Details
| da | 160 mm |
| db | 177.8 mm |
| dc | 153.988 mm |
| Da | 289.999 mm |
| Ca | 89.789 mm |
| A1 | 158.75 mm |
| A2 | 288.925 mm |
| S | 4.763 mm |
| ba | 70.644 mm |
| H | 336.55 mm |
| H1 | 169.875 mm |
| H2 | 66.675 mm |
| J min. | 441.325 mm |
| J max. | 488.95 mm |
| J1 | 95.25 mm |
| L | 558.8 mm |
| N1 | 28.575 mm |
| R1 | 104.775 mm |
| R2 | 33.337 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 52.388 mm |
| Housing | SAF 232 |
| Stabilizing ring | SR-32-0 |
| Taconite seal (db shaft position) | TER 156 |
| Taconite seal (dc shaft position) | TER 142 |
| End plug (suffix Y) | EPR 18 |
| Max. speed for Taconite seal | 440 r/min |
| P60° | 226 kN |
| P90° | 136 kN |
| P120° | 85.9 kN |
| P150° | 78.3 kN |
| P180° | 94.3 kN |
| Pa | 60.9 kN |
| Mass pillow block | 94.3 kg |
| Cap bolt | 4 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 203.4 N·m |
| Cap bolt, SAE grade | 5 |
| Eye bolt | 2 x 3/8-16 UNC |
| Appropriate attachment bolt size G | 1 in |
| Initial grease fill | 793.8 g |