Z-524289.02.ZL FAG ROLL NECK BEARINGS for ROLLING MILL
Brand Name: | FAG |
Model Number: | Z-524289.02.ZL |
da: | 160 mm |
db: | 177.8 mm |
dc: | 153.988 mm |
Da: | 289.999 mm |
Ca: | 89.789 mm |
A1: | 158.75 mm |
A2: | 288.925 mm |
S: | 4.763 mm |
Product Details
da | 160 mm |
db | 177.8 mm |
dc | 153.988 mm |
Da | 289.999 mm |
Ca | 89.789 mm |
A1 | 158.75 mm |
A2 | 288.925 mm |
S | 4.763 mm |
ba | 70.644 mm |
H | 336.55 mm |
H1 | 169.875 mm |
H2 | 66.675 mm |
J min. | 441.325 mm |
J max. | 488.95 mm |
J1 | 95.25 mm |
L | 558.8 mm |
N1 | 28.575 mm |
R1 | 104.775 mm |
R2 | 33.337 mm |
RG | 3/4 NPT |
PG | 1/4 NPT |
h | 52.388 mm |
Housing | SAF 232 |
Stabilizing ring | SR-32-0 |
Taconite seal (db shaft position) | TER 156 |
Taconite seal (dc shaft position) | TER 142 |
End plug (suffix Y) | EPR 18 |
Max. speed for Taconite seal | 440 r/min |
P60° | 226 kN |
P90° | 136 kN |
P120° | 85.9 kN |
P150° | 78.3 kN |
P180° | 94.3 kN |
Pa | 60.9 kN |
Mass pillow block | 94.3 kg |
Cap bolt | 4 x 3/4-10 UNC |
Cap bolt recommended tightening torque | 203.4 N·m |
Cap bolt, SAE grade | 5 |
Eye bolt | 2 x 3/8-16 UNC |
Appropriate attachment bolt size G | 1 in |
Initial grease fill | 793.8 g |