Together 110 mm x 150 mm x 25 mm FAG 32922 tapered roller bearings Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | D | T | B | C | d | a | e | Y1 |
32922 | CYSD | 150 mm | 25 mm | 25 mm | 130 kN | 110 mm | - | - | - |
32922 A | Loyal | 150 mm | 25 mm | 25 mm | 127 kN | 110 mm | 26 mm | - | - |
32922*2 | CYSD | 150 mm | 25 mm | 24 mm | 85,5 kN | 110 mm | - | - | - |
32922/Q | SKF | 150 mm | 25 mm | 25 mm | 20 mm | 110 mm | 26 mm | - | - |
32922A | ZVL | 150 mm | 25 mm | 25 mm | 136 kN | 110 mm | 26 mm | - | - |
32922JR | KOYO | 150 mm | 25 mm | 25 mm | 129 kN | 110 mm | 26,3 mm | 0.36 | 1.69 |
32922X | NTN | 150 mm | 25 mm | 25 mm | 20 mm | 110 mm | - | - | - |
32922XA2 | NTN | 150 mm | 25 mm | 25 mm | 127 kN | 110 mm | 26,5 mm | - | - |
32922J | NSK | 5.906 Inch | 150 Millimeter | - | - | - | 4.331 Inch | 110 Millimeter | - | - | - |
20 mm x 43 mm x 13,25 mm FLT CBK-173 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
38,1 mm x 79,375 mm x 29,771 mm KOYO 3490/3420 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
95 mm x 170 mm x 43 mm KOYO 32219JR tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
57,15 mm x 97,63 mm x 24,608 mm Timken 28682/28622B tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
NTN 4T-32222DF tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
32 mm x 65 mm x 26 mm NSK R32-39 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
45 mm x 100 mm x 25 mm ISB 31309 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
Timken NP380290/NP533133 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
50,8 mm x 90 mm x 22,225 mm Timken 368/362 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
52,388 mm x 93,264 mm x 30,302 mm NTN 4T-3767/3720 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
100 mm x 180 mm x 46 mm CYSD 32220 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
66,675 mm x 107,95 mm x 25,4 mm ISO 29590/29520 tapered roller bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:48.809 mm; A1:98.425 mm; A2:149.225 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAFS 218; Stabilizing ring:SR-18-15; Labyrinth ring (db shaft position):LOR 112; PosiTrac Plus contact element (db shaft position):B10724-113; Labyrinth ring (dc shaft position):LOR 191; PosiTrac Plus contact element (dc shaft position):B10724-188; End plug (suffix Y):EPR 11; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:157 kN; P90°:94.3 kN; P120°:59.6 kN; P150°:54.3 kN; P180°:64.9 kN; Pa:41.8 kN; Mass pillow block:29 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; |
110 mm x 150 mm x 25 mm FAG 32922 tapered roller bearings Video
32922 FAG • ABF Store
Product properties. Availability 0 pcs; Brand FAG; Item Number 32922 FAG; Category Tapered Roller Bearing Single Row; Description from Medias Tapered
Tapered roller bearing 32922-FAG - 110x150x25 mm
Tapered roller bearing 32922-FAG , dim : Ø int. 110 x Ø ext. 150 x th. 25 mm. SAME DAY SHIPPING. The specialist at your service for over 10 years
32922 - FAG Taper Roller Bearing - Quality Bearings Online
Product: 32922-FAG | Brand: FAG | Size: 110x150x25mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
FAG 32922 Tapered Roller Bearing - Metric 110 mm ID, 25
FAG 32922 Tapered Roller Bearing - Metric 110 mm ID, 25 mm OD, 150 mm Width: Amazon.com: Industrial & Scientific
FAG 32922 Tapered Roller Bearing - Locate Ball Bearings
From textile machinery to vehicles, there is always a need for bearings. Let us locate the ball bearings you need from qualified and trusted manufacturers!
Bearing 32922 (FAG) | Size and Specification | Bearings
Tapered roller bearings 32922. Bearing number : 32922. Size (mm) : 110x150x25. Brand : FAG. Bore Diameter (mm) : 110. Outer Diameter (mm) : 150
Tapered roller bearings - 32922 - medias - Schaeffler
This function determines appropriate INA and FAG bearings based on ... Tapered roller bearings 32922, main dimensions to DIN ISO 355 / DIN 720, separable
FAG 32922 tapered roller bearings - Nodes bearing
FAG 32922 bearing, tapered roller bearings, Dimensions: 110mm x 150mm x 25mm, Cr: 133000N, C0r: 231000N, Limiting Speeds:4550 1/min