self aligning ball bearings
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing (fig. 1), which can be caused, for example, by shaft deflection.
- 30 mm x 72 mm x 27 mm ISO 2306-2RS self aligning ball bearings
- Intermediate Duty
- Setscrew Ball Bearing
- 40 mm x 90 mm x 23 mm ISB 1308 KTN9 self aligning ball bearings
- Normal Duty
- D-Lock Ball Bearing
- AST 2210 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 90 mm x 160 mm x 30 mm FAG 1218-TVH self aligning ball bearings
- Normal Duty
- Grip Tight Ball Bearing
- AST 2310 self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 20 mm x 47 mm x 14 mm FBJ 1204K self aligning ball bearings
- Normal Duty
- Grip Tight Ball Bearing
- 40 mm x 90 mm x 33 mm NACHI 2308 self aligning ball bearings
- Normal Duty
- D-Lock Ball Bearing
- 40 mm x 80 mm x 23 mm FAG 2208-K-2RS-TVH-C3 + H308 self aligning ball bearings
- Intermediate Duty
- Eccentric Collar Ball Bearing
- 100 mm x 180 mm x 46 mm NKE 2220 self aligning ball bearings
- Normal Duty
- Grip Tight Ball Bearing
- 90 mm x 160 mm x 30 mm ISO 1218K self aligning ball bearings
- Normal Duty
- D-Lock Ball Bearing
- 50 mm x 110 mm x 40 mm FAG 2310-2RS-TVH self aligning ball bearings
- Normal Duty
- Setscrew Ball Bearing
- 50 mm x 90 mm x 58 mm NKE 11210 self aligning ball bearings
- Intermediate Duty
- Setscrew Ball Bearing